This product is NO LONGER AVAILABLE (NLA).

Designed for simplicity and ease of installation, our cupholder slips into either door map pocket and mounts using no screws, tools, or tape. You can even fit two in each door. The shape interlocks with the door and map pocket to create a secure holder for cylindrical containers (soda cans, water bottles, even 20 oz.'ers). Inside diameter is 3" and a 2 3/4" deep at the front. Adding to the versatility of this device, it can be used to hold sunglasses, suntan lotion, or whatever else you may need to store in easy reach. Fits all Z3 and //M roadsters and coupes regardless of model year. Molded from semi-rigid urethane, black in color.

CLICK on the picture or title for additional images. Not recommended for tapered cups or open containers.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.
Quantity   

This product is NO LONGER AVAILABLE.

A Full Custom Fit Car Cover with Roadster Solutions’ exclusive Door Dent Protection, you can only get it here!

This is a Full Custom Fit Car Cover which is made of NOAH® and provides a great performance value. It’s a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. This cover is available for either the roadster or coupe (special order). The roadster cover is normally in stock and ready to ship.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This OFFICIAL BMW accessory is currently available for Z3 roadsters model year 2000, 2001, & 2002 only. Not currently available for the 1996-1999 Z3 or the ///M roadster (see comparable unit above). Spacious pockets allow for storing items usually found loose in your trunk. Comes with detailed instructions. "Z3" is embroidered on the middle flaps (as shown). VELCRO secures the pocket flaps. GRAY in color. Flashlight not included.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

Price $10.95 + S/H

This product is NO LONGER AVAILABLE.

Click on the TITLE or PICTURE to see just how much stuf you can pack into this organizer. FRS Talkabout radios, cell phones, sunglasses, sunblock, power cord, and CD. There is even room left over! Each Door Pocket Organizer has two pockets one sized large enough for CDs and the other for small radios, cell phones, sunglasses, sunblock etc... The units can be easily installed and removed from the door pocket. Can also be mounted at the back of the center console below subwoofer. Finally a home for all those loose items that bounce around your cockpit. Available in BLACK.

This product is NO LONGER AVAILABLE.
Quantity   

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic DoorGuards can save the day when you're forced to park in a vulnerable location. Just take out of your trunk, place over the apex of your door and have instant peace of mind. While in place they look like a permanent installation. Each set contains two Black Magnetic DoorGuards designed to fit the Z3 doors. Yes, they can be painted. See below.

Intended for static use.

SALE Price (set of 2, unpainted black) - $69.95 + S/H

This original BMW product is NO LONGER AVAILABLE (NLA).

If your Z3 rear window is cloudy or scratched here is where to start. These are the products BMW recommends, in service bulletin 540500, you use to maintain the clarity of your rear window. CLICK on the or picture or title to see a great before and after picture. Meguiar's #17 and #10 are intended to be a restoration product. Meguiar's #18 is a maintenance product.

Meguiar's Mirror Glaze Clear Plastic Cleaner #17

Start here - Safely removes hairline scratches, dirt and grime. Clear plastic that has lost its clarity due to significant contamination and fine scratches should be treated using the two-step process. Meguiar’s non-abrasive, alcohol-free Plastic Cleaner aggressively cleans and removes scratches without harming the surface. Follow up with the #10 Plastic Polish for a perfect finish - 8 oz.

Mirror Glaze Clear Plastic Polish #10

Use this one second - The finishing touch for maximum clarity and brilliance. Meguiar’s Plastic Polish provides the second step in the two-step restoration process for clear plastics. One easy application protects surfaces previously cleaned with #17 Plastic Cleaner. You will restore the natural brilliance, while leaving behind an anti-static coating that helps repel damaging dust and dirt - 8 oz.

Meguiar's Mirror Glaze Clear Plastic Detailer #18

Use this on an ongoing basis - A single-step solution that keeps clear plastic surfaces pristine. Regain the original crystalline clarity of plastic in need of restoration, using this convenient all-in-one product specially formulated by Meguiar’s. Simply spray it on and wipe it dry. You will safely remove surface contamination and achieve dramatic results on everything from window panels to instrument lenses - 8 oz.

Great for headlight lenses too!

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic DoorGuards custom painted to match your car. Easy on / off door protection. Shown here in Estoril blue but available in all stock BMW colors. Only you will know it isn't a permanent installation. You'll find the specific paint code you need on the left front strut tower. We'll need this information. You may enter it on check out in the designated location, e-mail, or call it in. Painting takes ~10 business days. This is a special order part and returns will be allowed for product defect only.

CLICK on the PICTURE at top left or TITLE to find the location of your paint code.

Easy to install and remove.

Intended for static use.

SALE Price (set of 2, painted) $139.95 + S/H

This product is NO LONGER AVAILABLE.

A Full Custom Fit Car Cover for the 986 Boxster with Roadster Solutions’ exclusive Door Dent Protection, you can only get it here!

This is a Full Custom Fit Car Cover which is made of NOAH® and provides a great performance value. It’s a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. This cover is normally in stock and ready to ship.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

Here are the products we recommend you use to maintain the clarity of your rear window.

Meguiar's Mirror Glaze Clear Plastic Detailer #18

A single-step solution that keeps clear plastic surfaces pristine. Regain the original crystalline clarity of plastic in need of restoration, using this convenient all-in-one product specially formulated by Meguiar’s. Simply spray it on and wipe it dry. You will safely remove surface contamination and achieve dramatic results on everything from window panels to instrument lenses - 8 oz.

Meguiar's Mirror Glaze Clear Plastic Cleaner #17

Safely removes hairline scratches, dirt and grime. Clear plastic that has lost its clarity due to significant contamination and fine scratches should be treated using the two-step process. Meguiar’s non-abrasive, alcohol-free Plastic Cleaner aggressively cleans and removes scratches without harming the surface. Follow up with the #10 Plastic Polish for a perfect finish - 8 oz.

Mirror Glaze Clear Plastic Polish #10

The finishing touch for maximum clarity and brilliance. Meguiar’s Plastic Polish provides the second step in the two-step restoration process for clear plastics. One easy application protects surfaces previously cleaned with #17 Plastic Cleaner. You will restore the natural brilliance, while leaving behind an anti-static coating that helps repel damaging dust and dirt - 8 oz.

All three products - Price $29.95 + S/H

Price 394.00 plus S/H.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic DoorGuards custom painted to match your car. Easy on / off door protection. Shown here in Guards Red but available in all stock Porsche colors. Only you will know it isn't a permanent installation. Painting takes ~10 business days. Please be sure to enter your paint color in the customer comments box on check out. This is a special order part and returns will be allowed for product defect only. Fits 986, 987, 996, 997 and other Porsche models that have doors longer than 47".

Price $114.95

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Enjoy the comfort of open air driving without the wind. This OFFICIAL BMW WindScreen installs in seconds and has a zipper to raise and lower the center screen. This innovative design lets you use the storage space behind the roll hoops when the top is up. The mesh also helps keep your car cool and decreases the glare from headlights at night.

This BMW WindScreen will fit all BMW Z3's WITH factory roll hoops regardless of model year.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

NEW IN STOCK - This handy trunk lid storage unit has three generous pockets and twist to fasten closures that stay closed then the trunk lid is closed. Dark Gray in color. Keeps loose items in trunk secure. Fits 2002 through 2005 Retro Birds.

This product is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Enhance the beauty of your Z-3 or ///M roadster with the stunning appearance of hand polished Stainless Steel roll hoops. Brushed Stainless available by special order. No drilling or welding is required. Easy to install yourself, or by local garage using factory mounting points. For model years 1998 through 2002. Diameter: 60mm or 2.4 inches. Wall tickness: 2mm or .08 inches.

Click here for more pictures and Installation Instructions Courtesy of MZ3.net

Click here for more pictures and a review of this product Courtesy of Z3roadster.net

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

5-speed Maple Gear Shift Knob for Z3. Polished maple gear shifter features Z3 insignia. For manual transmission. Fits all models and years.

Easy pull off / push on installation.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Polished aluminum shifter has sleek look and feel. For manual transmissions. Fits all Z3 and M roadster models and years.

Easy pull off / push on installation.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Black leather knob with chrome ring and emblem. For manual transmission. Fits all models of Z3 and M roadsters & coupes.

Easy pull off / push on installation.

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

WOW! What a great look!

OFFICIAL BMW Z3 roadster / coupe CHROME Side Gills for the chrome enthusiast.

These OFFICIAL BMW CHROME Side Gills fit all Z3 roadsters and coupes. In stock, ready to ship, but very limited availability. Easy installation, everything is included, even new ROUNDEL emblems.

Sorry - This item is NO LONGER AVAILABLE.

Price $299.95/set of 2 + S/H

This is a must for your car if it is not driven regularly or is parked for extended periods! This Battery Maintainer will work with ALL cars with 12V electrical systems. Keeps your battery fresh and ready to go when you are.

The Advanced Battery Charging System is a 4 Amp battery charger designed to fully charge and maintain a battery at a proper storage voltage without the damaging effects caused by trickle chargers. The new BTP micro-chip technology applies the correct peak charge, then automatically maintains the battery at the perfect float voltage which virtually eliminates battery destroying sulfation! Temperature compensation ensures optimal charge voltage even in extreme weather conditions. Spark proof powder coated aluminum chassis. Reverse polarity protection ensures safety.

- Size: 4.88 x 3.25 x 2.88" Input Power: 115VAC @ 60Hz, Weight: 2.7 lbs.

BMW offers ALLIGATOR CLIPS to attach directly to the battery.

Price $0.00 + S/H -- THIS ITEM IS NO LONGER AVAILABLE

SORRY, THIS ITEM IS NO LONGER AVAILABLE in either CHROME or BLACK CHROME finish.

CHROME or BLACK CHROME exhaust trim for Z3 1.9. Single pipe. Easy installation. US cars only.

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

Typically for the Z3 2.8 built 10/1998 and later.

Chrome exhaust trim (pair) for Z3 2.8 10/98 and later production date. (The production date can be found inside the driver (left) door frame). Similar to above. Easy installation. 18-10-7-500-200 US only.

If you are not sure place the last seven digits from your VIN number in the box below and we will make sure you get the correct tips.

Price $0.00 (pair) + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This custom fit cover with mirror pockets made from NOAH material will protect your finish from most all weather conditions. NOAH represents the best value with very good water, dust, and UV light protection. Select year and model on check out.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Keep dust and dirt off your hard top during storage using your hard top hoist.

DUST COVER ONLY - does not include any hoist hardware or straps.

This product is NO LONGER AVAILABLE.

THIS ITEM IS NO LONGER AVAILABLE

Fits all MINI, 3 Series, and 1 Series with adjustable headrests.

Regardless of the seat height or position both the driver and passenger will have no trouble accessing the seat belt using these Seat Belt Holders. They put the seatbelt where you can reach it easily. Sold in sets of two.

THIS ITEM IS NO LONGER AVAILABLE

This product is NO LONGER AVAILABLE.

Available for both early TBirds and NEW Retro. TBirds. Select model year on checkout or call us toll free.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

Price $99.95 plus S/H

This original BMW product is NO LONGER AVAILABLE (NLA).

Protect your BMW factory semi-rigid boot cover with this handy Boot Protector. Easy to use and great for storing the boot cover in your trunk or garage. Click on the picture or title above to see another view.

SALE Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic DoorGuards can save the day when you're forced to park in a vulnerable location. Just take out of your trunk, place over the apex of your door and have instant peace of mind. While in place they look like a permanent installation. Each set contains two BLACK unpainted Magnetic DoorGuards designed to fit the Mini Cooper doors. Intended for static use only.

We can also paint them to match your Mini for an additional $70.00. Enter PAINT COLOR and CODE in comments box or at checkout.

If you are having trouble locating your paint code give us a call, we may be able to help.

SALE Price (set of 2) - $69.95 unpainted, $139.95 painted + S/H

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Now available for the NEW MINI coupe and roadster, make selection at check-out.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

Price $54.95 + S/H

This product is NO LONGER AVAILABLE.

Official BMW Z4 E85/E86 roadster/coupe and ///M roadster/coupe floor mats. Super plush with high density carpet heel pad. Select car, color option (BLACK and GRAY) and EMBROIDERY (Z4 or ///M) from drop down menu on check out. LEFT-HAND DRIVE CARS ONLY. Sold as a set of 2.

Price $0 (Pair) + S/H

This product is NO LONGER AVAILABLE.

SORRY, THIS OEM ITEM IS NO LONGER AVAILABLE.

From BMW, the spacious pockets allow for storing items usually found loose in your trunk. Provides a great place for the owners manual. It takes only seconds to install with four secure push-in fasteners - instructions are included. Dark gray with "Z4" embroidery. This unit fits all E85 Z4's (2003-2008), will NOT fit the NEW E89 Z4 (2009-Later).

Price $0.00 + S/H

*

Sorry - This item is NO LONGER AVAILABLE.

This official BMW carpeted trunk mat is a great way to give a touch of class to your trunk. The carpeted roadster trunk mat has an embroidered "roadster" logo. The coupe mat has an embroidered with "Z3" or "///M" logo. Select model on checkout.

Sorry, 1996 - 2002 Z3 Roadster Trunk Mats (159), (160) - NO LONGER AVAILABLE (NLA)

Coupe mats are no longer available, as well. (880) - NO LONGER AVAILABLE (NLA)

Price $0.00 + S/H

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic Door Guards can save the day when you're forced to park in a vulnerable location. Just take out of your trunk, place over the most vulnerable area of your door and have instant peace of mind. While in place they look like a permanent installation. Each set contains two (2) BLACK Magnetic Door Guards designed to fit the Z4 doors. Yes, they can be painted to match your Z4. Additional charges apply, see below.

Intended for static use.

SALESale Price (set of 2) - $69.95 + S/H

Price $625.00 + S/H

SORRY, THIS ITEM IS NO LONGER AVAILABLE in either BLACK or CHROME finish.

This removable trunk rack is just the thing for traveling and looks good too. See the integrated travel case below. Requires drilling four holes in trunk lid. Holes are pre-marked on the underside of your trunk lid. The BMW detachable luggage hard and soft cases are still available in very limited quantities.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Designed to fit the BMW Z3 Trunk Rack. Weather tight! Locks onto the Trunk Rack for security. Easy on and off. Z3 logo on the lid. This Luggage Case is not compatible with any other trunk rack. A must have for travel.

An inner case is still available in very limited quantities, see below.

Sorry - This item is NO LONGER AVAILABLE.

This OEM product is NO LONGER AVAILABLE.

Official BMW Z3 roadster/coupe seat covers. Save your interior from wear and tear and keep your seats cool in supper and warm in winter. Could be your seats are looking worn or tired, this is also a great way to hide imperfections. Easy on, easy off. Rugged cotton/poly cloth - Sold in pairs.

Price per pair $92.95 + S/H

Sorry - NO LONGER AVAILABLE.

This original BMW OEM accessory is NO LONGER AVAILABLE.

Keep your Z3 looking clean with these offical BMW Mud Flaps. Fits all Z3 and ///M roadster and coupes. For ultimate stone protection use these with Z3 Magnetic StoneGuards shown above.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $33.95 a pair + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW OEM accessory is NO LONGER AVAILABLE.

Add these BMW Z3 mud flaps to the rear wheel wells to minimize the splash back. Great when driving on dirty surfaces. Made for 1.9 Z3 but will work on 6 cyl cars as well.

Consider using our magnetic stone guards, below, as a replacement for the rear mud flaps.

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A Full Custom Fit Car Cover with Roadster Solutions’ exclusive Door Dent Protection, you can only get it here!

This is a Full Custom Fit Car Cover which is made of NOAH® and provides a great performance value. It’s a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. This cover is normally in stock and ready to ship.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This original BMW OEM accessory is NO LONGER AVAILABLE. Protect your paint from stones and dirt kicked back from front tires with these official BMW Mud Flaps. Not for use with aero components. Set of two. Black.

Price $60.95 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW OEM accessory is NO LONGER AVAILABLE. Complete the protection of your paint with these official BMW Rear Mud Flaps. Not for use with aero components. Set of two. Black.

Price $74.95 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This high quality stainless steel frame will give your "roadster" a finished look. Comes complete with screw caps. Official BMW part.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

This is just the item to keep your trunk lid free of finger prints. Easy installation - no screws or holes to drill. Brushed 304-grade stainless steel. Roadster Only. Not for the NEW E89 Z4.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price 18.95 + S/H

This original BMW product is NO LONGER AVAILABLE.

You can always use a flashlight to help find things in the dark. This official BMW unit recharges in the electrical socket and stores easily in many locations. "BMW" printed on the side.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE. Reading maps at night is no problem with this halogen gooseneck map light. Fits into any lighter socket.

Price 0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

These are Official BMW OEM seat covers custom fit for the E85 (2003-2008) BMW Z4 with seats with adjustable head rests. Not available for SPORT SEATS. "BMW" lettering on each seat back. Available in BEIGE. Select color at checkout. Sold in sets of two.

Price $0.00 set + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Complete kit for changing your Z4 to the clear look. Includes both tail lights, 2 side markers left and right, and the center rear brake lights. An 8mm deep socket required for installation.

Sorry - This item is NO LONGER AVAILABLE.

WheelWax - Reduces Brake dust while making your wheels easier to clean. Goes on easy, removes residual brake dust from wheels that washing leaves behind.

WheelWax is a soft paste that contains an antistatic agent that changes the surface polarity of your wheels to repel negative brake dust particles.

Buffs all wheels to a high shine in no time. Keep a good coat of WheelWax on your wheels all year round for great looking wheels in between washing your car. 8 oz container.

Price $15.00 + S/H

This product is NO LONGER AVAILABLE.

This cover is for the NEW (2009-Later) Z4. It is made from the NOAH fabric. This cover offers great all weather protection and can be used indoors and outdoors. A storage bag is included. Color is GRAY.

Click " HERE" for more information about the fabrics used in our covers.

NOTE: Please allow approximately two weeks for delivery of this custom fit cover.

This product is NO LONGER AVAILABLE.

This item is No Longer Available.

Price 0.00 +S/H

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Swap out your Amber lights for Clear/White lights. Give your Z3 a distinctive newer look! Our kit includes both front and both side marker clear/white lights as shown (4 total). The headlight assembly is not included with this Clear Light Kit, just the front corner and side lights.

If you need only half of the kit see below.

All parts are OFFICIAL BMW parts and are simple snap in installations.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Give your Z4 a more finished look with these easy to install covers. Color matched to interior not the convertible top. Storage bag included. Select color on checkout - Available in BLACK or GRAY to match your interior. Sold in sets of two(2).

These top covers must be installed when the top is lowered. And, YES, they must be reomved before the top goes up. A minor inconvenience to cover those unsightly holes on each side of the folded convertible top.

This item is NOT for the NEW E89 Z4 (2009 - Later).

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $144.95 + S/H

Price 49.95 +S/H

NO LONGER AVAILABLE!

Three spacious pockets that stay closed when the trunk is closed allow for storing items usually found loose in your trunk. This Pocket Pod also cleans up the unfinished look of your trunk lid. Easy to install and very secure - instructions are included. Charcoal color. This unit fits all E85 Z4's (2003-2008), will NOT fit the NEW E89 Z4 (2009-Later).

SALE Price $129.95 + S/H

Here is a great way to dress up your trunk. Fits all Z4s with and without trunk racks. Holds new Clear Windscreen too. Dark gray in color with "roadster" embroidery. Now in stock.

Price $49.95 + S/H

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Magnetic DoorGuards custom painted to match your car. Easy on / off door protection. Available in all stock BMW Z4 colors. Only you will know it isn't a permanent installation. A drop down list is provided with all stock colors for selection on checkout. Painting takes ~10 business days. This is a special order part and returns will be allowed for product defect only.

Intended for static use.

CLICK on the PICTURE or TITLE to find the location of your paint code.

SALESale Price (set of 2) - $139.95 + S/H

SORRY, THIS ITEM IS NO LONGER AVAILABLE (NLA).

This is the OFFICIAL BMW Part, not an imitation. You can buy with confidence that this part, unlike less expensive imitations, has passed BMW engineering evaluations with flying colors. Dealers and the BMW Factory Z4 fleet managers use this part to protect their cars and so can you. Protect your front spoiler from minor impact damage with this easy to install SpoilerGuard. Each side of the clear two part assembly attaches using two existing screw holes and one self tapping screw. All necessary hardware is included. With just one avoided scuff the part can pay for itself with saved repair costs. Please note: This part is only designed to minimize damage to the front spoiler from steep inlines, speed bumps, potholes and minor curb scuffs at low speeds. It is made from impact resistant clear PETG and intended to be sacrificial. Select model year on checkout. Not for the 2006, 2007, or 2008 roadster or ///M roadster.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Want just the tail lights? Here you go. Change your Z4 to the clear lite look. Includes both tail lights. An 8mm deep socket required for installation.

Two side markers left and right are available above.

The center rear brake light is available above.

These lights are intended for the 2003-2005 Z4.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, this item is NO LONGER AVAILABLE.

This is the official BMW Trunk Lid Railing System. It is the required attachment system for all BMW trunk mounted accessories.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This high quality unit attaches to your Z4 trunk railing system (see above) in minutes and allows you to carry skis or snowboards. Folds to allow access to trunk without removal and locks to keep contents secure.

SALE Price $39.95 + S/H

Headlamp and Signal Lamp protection kits can save you hundreds of dollars in replacement costs from stone impacts.

Sale Price: $29.95/set + S/H

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price - 4 piece kit - $24.95 + S/H

Kit includes: 3 cans of Invisible Glass 3 Glass Cleaning Towels.

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price - 6 piece kit - $24.95 + S/H

Kit includes: 1 can of More Shine Less Time for Tires
1 can of More Shine Less Time for Vinyl, Plastic & Rubber
1 can of Trim Shine
1 can of SpeedBead
1 can of BeadMax
1 can of Tarminator
1 can of Invisible Glass
1 can of Trim Cleaner
1 can of Upholstery & Carpet Cleaner
1 can of XENIT All Natural Cleaner
1 can of Fabprotex for carpet and mats
1 can of GUST Premium Air Duster
2 glass cleaning towels
1 applicator towel

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price $49.95 + S/H

This product is NO LONGER AVAILABLE.

Same cover as shown above in Blue WeatherShield but made in NOAH fabric.

This is a Full Custom Fit Car Cover which is made of NOAH® and provides a great performance value. It’s a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. This cover is normally in stock and ready to ship.

NOT available for the NEW MINI coupe and roadster.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Z3 CLEAR or TINTED Lexan WindBlocker. Available in both CLEAR and TINTED. Select tint option on checkout from drop down list. The thickness of the acrylic and a bend in the material top and bottom makes this a very stable WindBlocker for BMW Z3. Attaches with 6 low profile VELCRO straps that go around the roll hoops. Very easy to install and remove.

This WindBlocker will fit all BMW Z3's WITH factory roll hoops regardless of model year.

Price $0.00 + S/H We price match on this item, we will not be undersold.

Sorry - This item is NO LONGER AVAILABLE.

Currently out of Stock. SORRY, this item is NO LONGER AVAILABLE.

BMW Z4 trunk lid rack that attaches to the railing system shown above. Trunk railings are required.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE in either BLACK or CHROME finish.

For Z3 roadster model year 1996 - 1999 only. Will not fit the ///M roadster. Add this convenient handle to your Z3 trunk so you can close it without getting finger prints on your paint. Attaches easily using provided automotive adhesive (tape). Available in BLACK or CHROME finish. Select finish during checkout from drop down list.

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Official BMW Z4 bra offers great paint protection from stones and bugs on long trips or just around town. For better protection this bra covers a portion of the hood. To open the hood merely unhook the velcro fasteners and fold the hood portion forward, it's that easy. Has cutouts for all Z4 configurations; front license plate and headlight washers. BLACK vinyl with soft felt backing. Fits the 2003-2008 (E85/E86)Z4.

Will NOT fit Z4 ///M roadster or BMW front aero kit modified cars or the NEW (E89) Z4. US cars only.

These BRAs are in limited quantities. BMW does not plan to continue to offer, when this stock is gone, this item will be No Longer Available (NLA)

BMW Z4 2003-2005 => 0 remaining

BMW Z4 2006-2008 => 0 remaining

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

This Official BMW WindScreen (Type II) is made for all BMW Z3's (primarily 96 and 97 in the U.S. market) without roll hoops. It will not work if the car has roll hoops. If your BMW Z3 does not have roll hoops this WindScreen is your only answer.

This BMW WindScreen will fit all BMW Z3's WITHOUT factory roll hoops regardless of model year.

Installation requires moderate mechanical ability. Installation instructions are available. Picture used with permission from MZ3.net.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

The hard shell case secures to trunk lid rack for extra storage space. Trunk rails and rack (above) are required for mounting the case to the trunk.

Sorry - This item is NO LONGER AVAILABLE.

Price $0.00 plus S/H

This product is NO LONGER AVAILABLE.

Currently out of Stock. This item is NO LONGER AVAILABLE.

Official Ford bra with Thunderbird logo.

Sorry - This item is NO LONGER AVAILABLE.

Currently out of Stock. This item is NO LONGER AVAILABLE.

Official Ford Midnight Black, Carpeted Floor Mats, Front Pair, With TBird logo.

Sorry - This item is NO LONGER AVAILABLE.

Currently out of Stock. This item is NO LONGER AVAILABLE.

Official Ford Midnight Black carpeted trunk mat for your cargo area. This mat is the same quality at the OEM carpeted floor mats.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Add the look and short shift feel to your interior with this official BMW Maple Wood Shift Knob. Easy to install with no tools. 5 speed shift pattern. Fits all BMWs.

Easy pull off / push on installation.

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Offical BMW Z4 E85 (roadster), E86 (Coupe) 2003-2008 Strut Brace. Installs in about 30 minutes. Increase the front chassis rigidity and add a sportier look and feel. Polished aluminium finish. Chrome rear braces in picture not included. Fits all models of Z4 including ///M roadster and coupe both left and right hand drive.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

CLICK "HERE" for more information about the fabrics used in our covers.

Enter year and specific model on checkout in comments box.

Price $229.95 + S/H

Enter year and specific model on checkout in comments box.

Price $129.95 + S/H

Price 62.95 +S/H

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Protect your doors!!! Magnetic door guards painted to match your TBird. Easy on - easy off. Set of two 47" doorguards. Static use only. Select paint color on checkout. Allow 7 days for paint.

SALEPrice 129.95 + S/H

This original BMW product is NO LONGER AVAILABLE.

Original BWM Soft-Top Care Kit – Everything needed to keep your fabric top looking new!

Original BMW Vinyl Care – A deep care product with silicone for all synthetics in and around the vehicle, such as in the cockpit, door trim and bumpers. The care agent protects against brittling and graying, provides anti-static protection, restores a silky mat finish to the vehicle interior, Scented. Not to be used on windows or steering wheels, seats or pedals.

Soft-Top Cleaner - Original BWM Soft-Top Cleaner – For cleaning of all usage and environmental related soiling of light and dark soft-top fabrics. Please note: do not use in harsh sunlight. Any residue left on the paintwork should not be allowed to dry and must be immediately washed away. An after-treatment with Original BMW Soft-top Repellent is highly recommended.

Car Wash shampoo - Original BMW Car Wash Shampoo – Liquid cleanser for washing by hand. It removes stubborn soiling while conserving the was coating of painted services. Long lasting suds.

Soft-Top Repellent - Original BWM Soft-Top Repellent – For impregnating cleaned BMW convertible and roadster soft-tops.

Treesap Remover - Original BWM Treesap Remover – Cleaning product for dependable cleaning of stubborn tree sap or bird droppings from convertible soft-tops, paintwork, synthetics and glass.

Consider adding the Ultimate Cleaning Brush at Checkout.

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

Original BMW Leather Care Lotion with UV Protection – For the cleansing, protection and care of leather interiors in BMW vehicles, Don not use on porous surfaces such as buckskin, suede or velour. Features UV protection, High-quality, rejuvenating oils preserve the natural beauty of the leather. Restores resiliency, while enhancing the natural leather smell. Comes in a kit with three application sponges and removal cloths.

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

This is the official BMW shifter looks great and makes shifts shorter too. Fits all BMWs. Easy installation.

Easy pull off / push on installation.

Price $95.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

These Magnetic Door Guards will help keep your doors ding free. Easy to install and remove. unpainted color is BLACK.

We can also paint them to match your S2000 for an additional $70.00. Just enter PAINT COLOR and CODE in comments box or at checkout. Intended for static use only.

If you are having trouble locating your paint code give us a call, we may be able to help.

SALE Price (set of 2) - $69.95 unpainted, $139.95 painted + S/H

This product is NO LONGER AVAILABLE.

This SARIS Bones bike rack is both functional and attractive. It is easy to install and offers simple loading and unloading of bicycles. Includes all straps and hardware for securely transporting up to two bikes and mounts quickly to your Z3. Carries 2 bikes with ease. Awarded 4 1/2 stars (out of 5) by Bicycling Magazine. Injection-molded arms and legs are the strongest on the market.

* Built with 100% recyclable, non-rusting materials.
* Includes all hardware and straps for quick installation.
* Ratcheting anti-sway straps secure and stabilize bikes.
* Arc-based design fits over most spoilers and separates bikes on different levels.
* Easy-to-follow instructions included.
* Color is Dark Grey.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Cargo Mini fits in your trunk and helps keep cargo stable and organized. Folds for compact sotorage when not in use.

Dimension: Open - 18"L x 18"W x 8"H Folded - 18"L x 8.5"W x 4"H

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The Cargo Tray is compact enough to rest securely on the passenger seat for convenient access to items you need while driving. Also a great product to keep your cleaning products organized in your trunk.

Dimension: Open - 18.5"L x 12.5"W x 5.5"H Folded - 18.5"L x 5.5"W x 3.25"H

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE (NLA).

Carbon Fiber Rear Spoiler fits all Z4 Coupes and Z4 ///M Coupes. Easy to install with adhesive kit (included). Adds a sporty weight optimized aerodynamic look to your coupe.

SALE Price $0.00

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Z3 Trunk/Rear Mount Bike Rack. Comes assembled, include bike hold-down straps and anti-sway straps. Holds 2 bikes.

This product is NO LONGER AVAILABLE.

NO LONGER AVAILABLE!

This handy trunk lid storage unit has three generous pockets and twist-to-fasten closures that stay closed when the trunk lid is closed. Dark Gray in color. Keeps loose items in trunk secure.

Available for the 1996-1999 Z3, and the 1998-2002 ///M roadster. Shown here for the 1996-1999 Z3 and 1998 - 2002 ///M roadster. Make your selection at checkout.

Sorry No longer Available (NLA) for the 2000-2002 Z3.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

SALE Price $129.95 + S/H

This original BMW product is NO LONGER AVAILABLE.

BMW Business CD Radio (in-dash CD). This was optional in 1999. From 2000 through 2002 it was the stereo of choice. Fits all Z3's regardless of model year, 1996-2002. It is plug and play, easy install, a great replacement for the tape unit that was standard.

This is a NEW Blaupunkt factory original BMW in-dash CD player (CD43) with security code included. There are very few of these radios remaining in BMW's inventory. When they are gone they are gone.

Will fit vehicles with standard DIN size slot: BMW E36, Z3, M Roadster, M Coupe. This item is made by Blaupunkt GMBH for BMW. It will match your BMW interior design with the BMW amber-red illumination.

Price 0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

TOP PADS ONLY, NOT THE LIDS, NOT THE CONSOLE

 Does your Valet Console look worn and scratched. We can help. Two lid pads, specially designed to give maximum comfort and hide the worn look of the BMW Valet Console in your Z3. This makes your worn Valet Console look new again and makes a very comfortable armrest. Installs in a few minutes with no special tools. Pads are BLACK in color.

Click " HERE" for information about Z3 console options.

CLICK on the picture or title for a close up view.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

PADS ONLY, NOT THE CONSOLE (which is no longer available) 

Price $59.95 + S/H We price match on this item, we will not be undersold.

Sorry - This item is NO LONGER AVAILABLE.

Put an end to your hose storage problems! Complete with 50" of hose. The Hose Reel has a 3' supply hose for connection to your air supply. The reel can be hung from the wall or ceiling with the mounting fixture that is provided. Auto Rewind. 3/8" I.D. 50 foot 300psi oil resistant YELLOW PVC hose included.

SALE Price $292.95 + S/H

This original BMW product is NO LONGER AVAILABLE. Original BMW Tire Shine helps retore the new tire look to your BMW.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

Original BMW Hard Wax provides top-quality surface protection for all metallic and non-metallic paintwork by means of powerful polymers. Also suitable for chrome, painted plastic parts and for sealing alloy wheels.

Sorry - This item is NO LONGER AVAILABLE.

Original BMW Paint Scratch Remover helps minimize small shallow scratches on your BMW.

Price $31.95 + S/H

Protect your top from damaging your paint with this 3M clear Scotchcal film .008" thick. Easy to install and invisible. We sell it with everything required for installation; squeegee, Microfiber towel and installation instructions. Late model TBirds (2002-2005 only) came with this kit in the trunk but few took the time to install it. A must for those who wish to preserve their car.

Price $129.95 + S/H

This product is NO LONGER AVAILABLE.

Finally!!! Comfort for your elbow. PDK Design Products has made a winner. Installation takes only a few minutes and requires no tools, adhesives or modifications to your car. It is the perfect height for shifting (see inset picture)which is a critcal design feature for function and comfort. Plenty wide enough for two, with no "U" shaped hole in the middle. We have tested the Z4 Ultimate Armrest and give it my highest rating. It is a 100% improvement over the stock armrest. Color BLACK.

NOTE: If your Z4 does not have a "U" shaped pad behind the e-brake leather boot as shown here, this will complicate installation.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This 14 oz. insulated tumbler features press-on lid with sliding open/close mechanism for easy drinking. This mug is lined with Stainless Steel. Brushed stainless on the bottom, WHITE or BLACK in the center and polished stainless on the top.

Fits all BMW models. Buy a matching set!

This item is No Longer Available
Quantity   

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Official BMW Z4 cupholder. A great answer for those who desire a right hand grab cupholder for the Z4. Requires no tools to install. Top quality machined metal. Adhesive base mounts to console, top portion is removable and come with a soft storage bag. Easily stores on console compartment when not in use.

Sorry - This item is NO LONGER AVAILABLE.

If you are purchasing touch-up paint consider the Langka product above to do the job right.

This is the Official BMW Z4 touch-up paint. Each kit contains two bottles, the touch-up paint in the color you have selected and a bottle of clear coat to finish the job.

CLICK on the PICTURE or TITLE to find the location of your paint code.

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price $39.95 + S/H

If you are purchasing touch-up paint consider the Langka product above to do the job right.

This is the Official BMW Z3 touch-up paint. Each kit contains two bottles, the touch-up paint in the color you have selected and a bottle of clear coat to finish the job.

CLICK on the PICTURE or TITLE to find the location of your paint code.

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price $39.95 + S/H

This product is NO LONGER AVAILABLE.

For your ///M or any BMW without run flat tires.

Finally a quality Jack Kit for your BMW. This kit comes complete with the scissor jack, torque wrench, lifting crank, wheel chock for in front of the tire, and even a pair of gloves, all in a tough Cordura zipperd bag. This is the complete kit, everything you need just in case...

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

WOW! Look at this NEW Z3 Clear WindBlocker.

This is absolutely the best looking Z3 WindBlocker in the marketplace for your BMW. The clear acrylic center panel is held in place by three brackets that attach to the roll hoops with a two sided automotive adhesive. The center panel is removable for those times that you want the wind in your hair or to access the optional center storage compartment.

NOTE: This WindBlocker will fit all BMW Z3's and BMW ///M roadsters WITH factory roll hoops regardless of model year. The acrylic panel can be cleaned with a quality plastic cleaner/polish or soap and water.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

NEW BMW Z4 E89 (2009-Later) All Weather Trunk Liner. Heavy duty plastic, custom fit, easy to clean. A must have accessory to keep spills away from battery! Matches black rubber floor mats.

Sorry - This item is NO LONGER AVAILABLE.

Protect your paint from stones and dirt kicked back from front tires with these Official BMW Mud Flaps. Set of two. Color is BLACK. Select FRONT or REAR on checkout.

Price $88.95 + S/H

This product is NO LONGER AVAILABLE. BMW still offers an in-trunk CD changer for the Z3. There are very few of these CD changers remaining in BMW's inventory. When they are gone they are gone.

An installation bracket is also necessary if it is not installed on the right hand side of your trunk. See this item below.

Price $595.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

This is the installation kit for the Z3 in-trunk CD Changer which resides on the right hand side of the trunk.

Price $112.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

This is the OFFICIAL Mercedes Benz SLK (R171) MESH WindScreen. This WindScreen was standard equipment on all R171 SLKs. The mesh design minimizes back draft. Black in color.

Price $199.95 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This OEM product is NO LONGER AVAILABLE.

This is the OFFICIAL Mercedes Benz SL (R129) MESH WindScreen. This Original equipment SL R129 WindScreen is designed for the early model SLs. Minimizes back draft. Black in Color.

Price $620.00 + S/H

Sorry - This OEM item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE (NLA).

This is the OFFICIAL Mercedes Benz SLK MESH WindScreen for the early model SLK (R170) 1998-2004.

To insure exact fitment please enter your VIN# in the box below or at check out.

Price $167.00 + S/H

This product is NO LONGER AVAILABLE.

Protect the inside of your trunk from spills with this official molded easy to clean plastic trunk liner. 2 inch sides.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE (NLA).

Official SL Mercedes Benz Floor trunk net. Holds cargo securely. Rear Sill and Side nets are also available but must be ordered separately.

Price $0.00

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Official SL Mercedes Benz Side trunk net. Holds cargo securely. Floor and Rear Sill nets are also show available but must be ordered separately.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE (NLA).

Official SL Mercedes Benz Rear Sill Trunk Net. Holds cargo securely. Floor and Side nets are also available but must be ordered separately.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

These are the OFFICIAL Mercedes Benz SLK floor mats. Mercedes Benz Carpeted floor mats fit the Mercedes Benz SLK 1998-2011. Embroidered logo. Select MODEL YEAT, MODEL and COLOR at check out.

SLK200 or "AMG" adds $40.00 to the cost of mats, make this selection at checkout.

Price $00.00 + S/H (sets of two)

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Official Mercedes Benz SLK Door Handle Inserts. Give your SLK a custom look and protect your paint from ring scratches. Fits all SLK (R171 - 2006-Later). Set of two.

Price $89.95 (set) + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original MB product is NO LONGER AVAILABLE.

Protect the floor of your trunk with this durable, easy to clean plastic insert with 2 inch sides. Form fit to the SLK (R171) trunk. Unit ships in plastic bag due to size. Manual and duster shown for display purposes - not included. Fits SLK (R171) 2004-2011.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Similar to the one shown here in the SL. Cargo nets are a must for those twisty back roads to keep your cargo secure. Fits SLK (R171) 2004-2011.

Price $0 This product is NO LONGER AVAILABLE.

Hardtop in stand cover. Color is gray.

Price $119.95 + S/H

This product is NO LONGER AVAILABLE.

Finally, no more driving around with those annoying service lights on in your Z3!

Do you change your own oil or go to a fast lube? If you do, then the Peak R5 reset tool is made just for you. The R5 gives you the freedom to reset your own OilService/Inspection lights. NOTE: This tool is designed to work with the Z3

This tool is super easy to use.

Pictured below is the OilService/Inspection Service Reminder light cluster found in BMW automobiles. They are easily reset with this reliable low-cost service light reset tool.

Click on the picture or title to view the operation instructions.

Sorry - This item is NO LONGER AVAILABLE.

Price $49.95 + S/H

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included.

NOTE: Please allow approximately two weeks for delivery of this custom fit cover.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included.

Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait or select the "BMW Z4 Full Custom Fit Cover NOAH" below which is normally in stock.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This Full Custom Fit Car Cover is made of NOAH® and provides a great performance value, a great choice for indoor or outdoor use. It is water repellant, breathable, dust will not penetrate, offers ding protection, and it is UV light resistant. Both outer layers of this fabric are bi-component spunbond, using sheath core technology. Each fiber has a polypropylene inner core for strength with a polyethylene wrap for softness against your paint. Important for today's water based paint finishes. The micro-porous middle layer is a breathable, stretch-film technology developed exclusively for this cover material. The material is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust. This allows the cover to breathe and allows evaporation of trapped water or condensation and heat to escape. This also helps reduce the bulk of the non-woven fabric while providing a barrier for your paint. The NOAH® fabric is Gray in color which does not attract heat and the fabric is treated with UV inhibitors for extended outdoor use. With NOAH®, you can leave it on day after day. This is a custom fit cover with mirror pockets and it is made specifically to fit your car, not one of those one-size-fits-all covers: it fits like a glove. With all our full custom fit covers a storage bag is always included. Please allow approximately two weeks for delivery of this custom fit cover, it will be worth the wait.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

=> ONLY FOR 986/987 BOXSTER STEEL DOORS <=

These Magnetic Door Guards will help keep your doors ding free. Easy to install and remove. Color is BLACK. Intended for static use only.

We can also paint them to match your Boxster for an additional $70.00. Just enter the paint color in the comments box on checkout.

SALE Sale Price $69.95 (set of 2, unpainted) - $139.95 (painted) + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Original BWM Soft Top Repellent Concentrate for impregnating cleaned BMW convertible and roadster soft-tops.

8 fl oz (237 ml)

Price $33.95 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This is a really great piece of ORIGINAL BMW Z3 luggage. Designed to fit inside the BMW Z3 Trunk Rack Hard Case or use it as a separate piece of luggage. The Z3 logo is even embossed on the outside of this piece of luggage.

CLICK on the picture or title for a look at the entire case.

NOTE: We currently have a limited supply of these available, get yours now while they are still available.

SALE

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This 28 piece kit (worth $45.00) for just $34.95. This Kit includes: Invisible Glas, Reach & clean Tool, Raid Repellent, Headlight Restoration Kit, Lens Wipes, Mocrofiber Cloth.

Invisible Glass cleans windshields, windows, and mirrors so well, you'll think they're invisible. Other glass cleaners use water and "foamy" surfactants or soaps. These inexpensive ingredients remove basic dirt, but leave "streaky" residues that are difficult or impossible to remove. Invisible Glass cleans fast with a powerful, non-streaking, non-abrasive formula. It evaporates 100% and contains NO surfactants, soaps, or foams.

Invisible Glass improves visibility for professional drivers, racers, and motoring enthusiasts. Quickly removes dust, dirt, bugs, sap, oil, grease, fingerprints, and more from glass. If you are a demanding auto detailer, a finicky car collector, a show-car exhibitor, or simply want an extremely clear and streak-free view, you need Invisible Glass.

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

Price $24.95 + S/H

Do you own a Z3? Do you change your own oil or go to a fast lube? Do you want to interpret your "Check Engine" light? If you do, then this tool is made just for you. The R5fcx3 gives you the freedom to reset your own OilService/Inspetion lights plus diagnose "Check Engine" lights. NOTE: This tool is designed to work with the Z3.

This tool is super easy to use.

Pictured below is the OilService/Inspection Service Reminder light cluster found in BMW automobiles. They are easily reset with this reliable low cost service light reset tool.

When ordering the R5A/B Service Light Tool you will need to select either the Type A or Type B connection.

First, open your hood and locate the connector, here is what the under-the-hood connector looks like. Unscrew the dust cover to reveal the connector (Type A or B).

Type A is compatible with the 15 pin BMW connector used from 1982 to roughly 1987.

Type B is compatible with the 20 pin BMW connector used from roughly 1988 through 1999 (for Z3 through 2002). Your Z3 should look like this!

Price $149.95 + S/H

NO LONGER AVAILABLE!

This accessory is currently available for Z3 roadsters, all model years. Three spacious pockets allow for storing items usually found loose in your trunk. Comes with detailed instructions. Twist-to-Close locks secures the pocket flaps. Dark Gray in color. Select model at checkout.

Sorry No Lone=ger Available (NLA) for the 2000 - 2002 Z3 roadster.

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader...

Price $129.95 + S/H

Price $49.95 + S/H

This product is NO LONGER AVAILABLE.

Available only at Roadster Solutions.

Unpainted Magnetic Door Guards or Custom Painted to match or compliment your car's exterior. Easy on/off door protection. Available in all stock colors. Only you will know it isn't a permanent installation. Painting takes about 1 week. Painted Door Guards are a special order part and returns will be allowed for a product defect only. Intended for static use only.

If you are having trouble locating your paint code give us a call, we may be able to help.

Magnetic door guards are available in two lengths 43 or 47 inches in length.

SALE Price (set of 2) - Unpainted $69.95 + S/H

SALE Price (set of 2) - Painted $139.95 + S/H

SORRY, THIS ITEM IS NO LONGER AVAILABLE

BMW Z3 Cross Spoke Composite Style 42 - 17x7.5 (front). This is the Sport Package wheel 2000-2002. BMW roundel wheel center not included.

This is an ORIGINAL OEM BMW Part/Accessory.

SORRY, NO LONGER AVAILABLE 

SORRY, THIS ITEM IS NO LONGER AVAILABLE

BMW Z3 Cross Spoke Composite Style 42 - 17x8.5 (rear). This is the Sport Package wheel 2000-2002. BMW roundel wheel center not included.

This is an ORIGINAL OEM BMW Part/Accessory.

SORRY, NO LONGER AVAILABLE 

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Once again AVAILABLE in limited quantities.

Have you lost the drink RING in your cupholder console. We can provide a replacement RING (in front drink holder) if you have lost yours.

This is for a replacement RING only.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

While they last!

This is the OFFICIAL BMW OEM Rear Spoiler wing for the 2000-2002 Z3 roadster (part number 82-11-0-007-800). There are a few remaining in our inventory and when these spoilers are gone they are gone for ever. Sold unpainted but we can paint it (add $150.00) to match your Z3 and it is ready to install. Select paint color on checkout.

Instructions and install kit are included. Drilling is required for a very secure fit. Give us a call if you have any questions.

Shown here on an ///M roadster where it is not intended to fit. Minor modifications are required to the ///M roadster trunk lid for fitment.

Price Unpainted $299.95 + S/H, Price Painted $449.95 + S/H

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Make the most out of the small trunk space in your 2003-2009 BMW Z4 (E85) Roadster with this innovative 2-piece fitted luggage set, shaped to match the trunk dimensions.

This luggage features adjustable shoulder straps, padded carry handles, rugged, oversized zippers, extra utility pockets and is constructed with heavy duty hardware to withstand harsh trunk conditions and ensure years of reliable service.

CLICK on the picture or title for additional images on how it looks in the trunk.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Sorry, this item is currently on BACKORDER with our supplier

Make the most out of the small trunk space in your 2010+ BMW Z4 (E89) Roadster with this innovative 2-piece fitted luggage set, shaped to match the trunk dimensions.

This luggage features adjustable shoulder straps, padded carry handles, rugged, oversized zippers, extra utility pockets and is constructed with heavy duty hardware to withstand harsh trunk conditions and ensure years of reliable service.

CLICK on the picture or title for additional images on how it looks in the trunk with the top down or with the top up.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

We are over stocked on this cover so we are offering these Full Custom Fit (E46) 3 Series Covers at a significent discount. Hurry while supplies last.

This custom fit cover for E46 3 series with door protection panels made from NOAH material will protect your finish from most all weather conditions as well as your doors from dings. NOAH represents the best value with very good water, dust, and UV light protection. Enter model and year in comments box on checkout.

Click " HERE" for more information about the fabrics used in our covers.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

OFFICIAL BMW Nickel-finish pendant with BMW Roundel logo for your Z3 roadster or coupe.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE (NLA).

Official BMW Structured cotton canvas cap features M stripes. 100% cotton.

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE (NLA).

Improves battery performance with continued use. Solid state microprocessor, 8 stage maintainer, includes a battery rescue mode for abused batteries. Designed to stay on all the time and maintain automatically.

Includes two connection types; battery direct and alligator clip.

Easy to use

Rejuvenates weak batteries

Quick connects for easy install

Versatile mounting bracket

Works on all lead acid type batteries

CLICK on the picture or title for additional information.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This is a must for your car if it is not driven regularly or is parked for extended periods! This Battery Tester Digital Meter will work with ALL vehicles with 6V, 12V or 24V electrical systems with a cigarette lighter or auxillery port. A quick check of the voltage reading shows if the charging systems is working correctly.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE (NLA).

The Power Bar maintains, charges and conditions your battery. Using Pulse Technology and High Frequency reducing the size and weight while adding to the power. This type of maintainer/charger/tester is more intelligent, precise and offers more features and benefits than old fashioned bulky chargers. Because of the advanced circuitry it's now possible to plug a battery in, charge it, maintain it, and actually rejuvenate it so the next time the battery is used, it is in better condition than before it was plugged in. This extends the life of batteries and keeps them 100% charged and ready to go at any time. It's so small you can take it with you.

Includes two connection types; battery direct and alligator clip.

Maintains and conditions the battery

Lite weight & compact design

Tests & monitors the battery quality

Rejuvenates weak batteries

Charges quickly -- 25 watt output

CLICK on the picture or title for additional information.

Price $00.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

SLK Hood Inserts - Add extra style to the hood of your SLK with these SATIN/MATTE CHROME aerowings inserts. Fits all SLK 280 or 350. Made in Germany

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

This beautifully detailed BMW Z3, crafted in Sterling Silver by a local artisan, is perfect for that special Z3 enthusiast's slide charm bracelet.

Compatible with with most slide bracelets, including Pandora, Camilla & Trollbeads.

Price $0.00 + S/H

Plus FREE U.S. Domestic Shipping

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Same beautifully detailed BMW Z3 as the slide charm above, but now in a Pendant! Crafted in Sterling Silver by a local artisan, is the only necklace choice for that special Z3 enthusiast.

Price $0.00

Plus FREE U.S. Domestic Shipping

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE (NLA). Check out this really cool BMW Phone Hard Case.

Highlights of this iPhone 5/5S or Galaxy S III include carbon fiber patterns on the back and side and the BMW M logo.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

Sorry - This item is NO LONGER AVAILABLE.

Premier Custom Honda S2000 Floor Mats. Custom fit heavy duty cut nylon pile carpet. Set of 2 front mats (no grommets included). Model years 2000 - 2009 only. 100% durable with a thick, plush feeling. These floor mats have better coverage than most original mats and are WASHABLE! Sturdy vinyl nibbed backing keeps them in place.

We pride ourselves on carrying only the best products made from the very best fabrics available. Our custom-fit floor mats are made by the world's largest car cover manufacturer.

Premier Custom Honda S2000 Floor Mats are available in the following colors: Beige, Black, Caramel, Driftwood, Evergreen, Gray, Gray Mist, Navy, Smoke, Taupe and Wine. Previews of the available colors can be found by clicking on the underlined Premier Custom Honda S2000 Floor Mats link next to the picture above.

This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE.

Premier Custom BMW Z3 Floor Mats. Custom fit heavy duty cut nylon pile carpet. Set of 2 front mats (no grommets included). This will fit all models for years 1996 - 1999 only. 100% durable with a thick, plush feeling. These floor mats have better coverage than most original mats and are WASHABLE! Sturdy vinyl nibbed backing keeps them in place.

We pride ourselves on carrying only the best products made from the very best fabrics available. Our custom-fit floor mats are made by the world's largest car cover manufacturer.

Premier Custom BMW Z3 Floor Mats are SOLD OUT - NO LONGER AVAILABLE. Please look at our newest floor mats from Lloyd Mats.

Price/Item is NO LONGER AVAILABLE

Sorry - This item is NO LONGER AVAILABLE.

Premier Custom Porsche Boxster 981 (2013-2018) Floor Mats. Custom fit heavy duty cut nylon pile carpet. Set of 2 front mats (no grommets included). This will fit all models for years 2013 - 2018 only. 100% durable with a thick, plush feeling. These floor mats have better coverage than most original mats and are WASHABLE! Sturdy vinyl nibbed backing keeps them in place.

We pride ourselves on carrying only the best products made from the very best fabrics available. Our custom-fit floor mats are made by the world's largest car cover manufacturer.

Premier Custom Porsche Boxster Floor Mats are available in the following colors: Beige, Black, Caramel, Driftwood, Evergreen, Gray, Gray Mist, Navy, Smoke, Taupe and Wine. Previews of the available colors can be found by clicking on the underlined Porsche Boxster (2013-2015) Premier Custom Floor Mats link next to the picture above.

This item is NO LONGER AVAILABLE.

Sorry - This item is NO LONGER AVAILABLE.

Premier Custom Porsche Boxster 987 (2005-2012) Floor Mats. Custom fit heavy duty cut nylon pile carpet. Set of 2 front mats (no grommets included). This will fit all models for years 2005-2012 only. 100% durable with a thick, plush feeling. These floor mats have better coverage than most original mats and are WASHABLE! Sturdy vinyl nibbed backing keeps them in place.

We pride ourselves on carrying only the best products made from the very best fabrics available. Our custom-fit floor mats are made by the world's largest car cover manufacturer.

Premier Custom Porsche Boxster Floor Mats are available in the following colors: Beige, Black, Caramel, Driftwood, Evergreen, Gray, Gray Mist, Navy, Smoke, Taupe and Wine. Previews of the available colors can be found by clicking on the underlined Porsche Boxster (2005-2012) Premier Custom Floor Mats link next to the picture above.

This item is NO LONGER AVAILABLE.

Sorry - This item is NO LONGER AVAILABLE.

Premier Custom Porsche Boxster 986 (1997-2004) Floor Mats. Custom fit heavy duty cut nylon pile carpet. Set of 2 front mats (no grommets included). This will fit all models for years 1997-2004 only. 100% durable with a thick, plush feeling. These floor mats have better coverage than most original mats and are WASHABLE! Sturdy vinyl nibbed backing keeps them in place.

We pride ourselves on carrying only the best products made from the very best fabrics available. Our custom-fit floor mats are made by the world's largest car cover manufacturer.

Premier Custom Porsche Boxster Floor Mats are available in the following colors: Beige, Black, Caramel, Driftwood, Evergreen, Gray, Gray Mist, Navy, Smoke, Taupe and Wine. Previews of the available colors can be found by clicking on the underlined Porsche Boxster (1997-2004) Premier Custom Floor Mats link next to the picture above.

This item is NO LONGER AVAILABLE.

1992-1998 BMW E36 BLACK or CHROME Housing DRL Projector Headlights using H1 bulbs for the high and low beams. CLICK on the title or picture to see how they look installed.

These 92-98 E36 projector headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct replacement. We offer these headlights in either CHROME or BLACK housing for the customer to fulfill their own personal style.

Sold in sets of two. Includes the housing and all bulbs. The DRL projector headlights incorporate elegant L.E.D.s that illuminate the road better and allow the driver to have a safer and more enjoyable driving experience at night. These are not compatible with the TI model.

CLICK here for the headlight Alignment Instructions... CLICK here if you need Adobe Reader...

This is an oversized shipment, $25.00 will be added to the normal S/H charges.

Price $324.95 + S/H - PLEASE CALL FOR CURRENT PRICING!

SORRY, THIS ITEM IS NO LONGER AVAILABLE

Now you can keep all those small necessities close by without worrying about cluttering up your Roadster.

The intelligent design of the Universal Roadster Seatback Organizer allows you to maximize your space while keeping many objects within an arm's reach. It attaches easily and quickly to the headrest in your car and includes pockets for a beverage, tissues, a pen and many other items with 3 additional multi-use pockets (including 1 mesh pocket).

This seatback organizer features a reinforced nylon shell with elastic securing straps for when you're cruising around with the top down in your Roadster. An adapter slit allows for mounting the organizer on vehicles with headrest seat posts. This is the perfect organizer for any vehicle and a must have item for any Roadster enthusiast!

CLICK on the picture or title for additional images.

Price $0.00 + S/H

Sorry - This item is NO LONGER AVAILABLE.

SORRY, THIS ITEM IS NO LONGER AVAILABLE.

Sleek tumbler is detailed with a carbon graphite look and polished steel trim and features spill-resistant snap-fit lid. Constructed of stainless steel and foam insulated for extended temperature retention. Fits most cup holders. 16 oz.

SALE Price $0.00 + S/H
Quantity   

This original BMW product is NO LONGER AVAILABLE.

The Mitsubishi Spyder Eclipse Wind Deflector is available for the 2000-2005 model convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

The Sebring Convertible Wind Deflector is available for the 2001-2006 model convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

The Sebring Convertible Wind Deflector is available for the 1996-2000 model convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes 5-10 minutes and the only tool required is a screwdriver. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

This Saab Convertible Wind Deflector is available for the 1994-2003 900SE, 900NG and 9-3 models.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

This Saab 900 Convertible Wind Deflector is available for the 1987-1993 900 model convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

The Lexus SC 430 Wind Deflector is available for the 2002-2010 SC 430 model convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions..., Adobe Reader... or to see the Video...

Price $395 + FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

The Ford Mustang Convertible Wind Deflector is available for the 1991-1993 models. This wind deflector is designed to work with the boot cover on your convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions... or to get Adobe Reader...

Price $395+ FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original BMW product is NO LONGER AVAILABLE.

The Ford Mustang Convertible Wind Deflector is available for the 1983-1990 models. This wind deflector is designed to work with the boot cover on your convertible.

This easy to install windblocker requires no cutting, drilling or permanent modifications and can just as easily be removed for trunk storage in the Free protective bag included. Installation takes less than 5 minutes and no tools are required. It reduces those chilling drafts, quiets your cockpit, and is the single most effective and unobtrusive way to reduce strong and noisy wind gusts so you can enjoy your convertible even more! This product has a 1 year full manufacturer's warranty. CLICK on the title or picture to see additional images.

CLICK here for Installation Instructions... or to get Adobe Reader...

Price $395+ FREE Domestic Shipping*

Sorry - This item is NO LONGER AVAILABLE.

This original Mazda product is NO LONGER AVAILABLE (NLA).

OEM Fuel-Filler Door (Soft Top only) for the Mazda Miata (2006 - 2015) The CHROME finish Fuel-Filler Door adds the technical look to your already good looking MX-5. Brand new official licensed product of Mazda made with OEM excellence and high quality. This chrome fuel door uses your stock remote lid opener and fits all soft top models for years 2006 - 2015 only. Kit comes complete and ready to install with instructions included. An additional image can be viewed by clicking on the picture or the title above.

Price $109.95 +S/H

Sorry - This item is NO LONGER AVAILABLE.

This original Mazda product is NO LONGER AVAILABLE (NLA). The CHROME finish Fuel-Filler Door adds the technical look to your already good looking MX-5. This part is for POWER RETRACTABLE HARD TOPS ONLY! Brand new official licensed product of Mazda made with OEM excellence and high quality. This chrome fuel door uses your stock remote lid opener and fits all hard top models for years 2007 - 2015 only. Kit comes complete and ready to install with instructions included. An additional image can be viewed by clicking on the picture or the title above.

Price $131.95 +S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE. The BLACK Front Mask with Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great with an emblazoned deluxe Mazda logo and does not interfere with engine compartment access. Fits all models for years 2013 - 2015. May be used with or without fog lights. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITHOUT Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great with an emblazoned deluxe Mazda logo and does not interfere with engine compartment access. Fits all models for years 2013 - 2015 WITHOUT an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITHOUT Air Dam keeps your TOURING or GRAND TOURING MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great with an emblazoned deluxe Mazda logo and does not interfere with engine compartment access. Fits all TOURING AND GRAND TOURING models for years 2009 - 2012 WITHOUT an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask Sport WITHOUT Air Dam keeps your SPORT MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great with an emblazoned deluxe Mazda logo and does not interfere with engine compartment access. Fits all SPORT models for years 2009 - 2012 WITHOUT an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITHOUT Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great and does not interfere with engine compartment access or restrict air flow. Fits all models for years 2006 - 2008 WITHOUT an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITH Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty automotive vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great and does not interfere with engine compartment access or restrict air flow. Fits all models for years 2006 - 2008 WITH an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITH Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty 22 oz. Haartz® vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great and does not interfere with engine compartment access or restrict air flow. Fits all models for years 2001 - 2005 WITH an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The BLACK Front Mask WITHOUT Air Dam keeps your MX-5's front end free of nicks and scratches from insects, rock chips, road tar and other road debris. Brand new official licensed product of Mazda form-fitted from premium grade heavy duty 22 oz. Haartz® vinyl with OEM excellence and high quality. This Front Mask adds style and a custom look to your MX-5 while providing full front end coverage. Custom tailored to fit tight, look great and does not interfere with engine compartment access or restrict air flow. Fits all models for years 2001 - 2005 WITHOUT an Air Dam. May be used with or without fog lights. Images are shown on a model other than indicated. An additional image can be viewed by clicking on the picture or the title above.

This product is NO LONGER AVAILABLE.

GREAT gift idea for that special someone.

Now you can carry-on your clothes while traveling with a sophisticated first-class nylon trolley luggage bag.

This official BMW trolley features luxurious leather accents for a premium look, numerous compartments and storage features for easy accessibility and perfect logistics including a removable garment bag to protect your outfits (included with the 24.5" model only). A reinforced back panel and corners for maximum durability, aluminum telescopic handle with three height settings, metal-reinforced handles and silent, easy-glide all-rubber wheels add to its' convenience. Complete with an inlaid BMW roundel logo plate. This is the perfect piece of luggage for traveling and a must have item for any BMW enthusiast!

Available in two sizes: 20 inches or 24.5 inches (The 24.5" model, as shown above, includes a removable garment bag.) A picture of the 20 inch model can be viewed by clicking on the title or picture above. Please make your size selection on the checkout screen.

Price $323.95 + S/H for the 20" Trolley Luggage Bag; Price $373.95 + S/H for the 24.5" Trolley Luggage Bag

This product is NO LONGER AVAILABLE.

GREAT gift idea for that special someone.

Now you can sport the popular BMW M logo while being fashionable at the same time.

The eye-catching "carbon-fiber" appearance of this Official BMW M logo tie will surely turn some heads. Made of 100% silk and features a woven BMW M logo on the front and back so you will look sleek and stylish while displaying your fine taste in automobiles. Another image of the BMW M Tie can be viewed by clicking on the title or picture above. A must have item for any BMW enthusiast!

Price $84.95 + S/H

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy, lightweight competition Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and one half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all models of Z3 Roadsters, E36 series and corresponding ///M series including the S54 engine. It does NOT fit 4 cylinder models due to lack of room for the cross bar.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed specially for the E46 series to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy, lightweight competition Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and one half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all models of Z4, E46 series and corresponding ///M series including E85 and E86 Z4s and 1999-2005 E46 BMWs: 323i, 323ci, 325i, 325ci, 325xi, 328i, 328ci, 330i, 330ci and 330xi.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and 3/4 inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all E34 and E34 ///M models except for the M20 engine.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and 3/4 inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. The decorative holes in the cross bar are not drilled with a bit, they are cleanly CNC machined and the top and bottom have a small chamfer adding to the cosmetics. At the list price, the otherwise optional stainless steel accessory installation kit comes with the E39 Front Strut Brace. This is the small kit without the plastic tower caps because the E39 comes with tower caps. Fits all E39 and E39 ///M models.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and 3/4 inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. The decorative holes in the cross bar are not drilled with a bit, they are cleanly CNC machined and the top and bottom have a small chamfer adding to the cosmetics. Fits all E31 8 Series models including the 840 and 850.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. The Front Strut Brace contributes significantly to the structural integrity of the car and improves maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy Front Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. The tower plates are 3/8 inch thick and fully machined on the bottom side to match the ribs on the tower domes. The cross bar has no vertical bends, it fits directly into the ring receiver blocks. The arc of the cross bar is an exact match for the arc in the air circulation components attached to the underside of the hood and that is how we solved the clearance issues. It is not possible to route a cross bar straight from one shock tower to the other. In addition, there is a massive, proven, two inch wide and half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. The decorative holes in the cross bar are not drilled with a bit, they are cleanly CNC machined and the top and bottom have a small chamfer adding to the cosmetics. Fits all E38 7 Series versions including the 740, 750 & Li models.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The Rear Strut Brace provides significant bracing and reinforcement to the rear section of these models. Although it appears to be bolted to the sub-frame/rear axle carrier, it actually bolts to the chassis by utilizing the rear sub-frame mounting brackets that support the sub-frame assembly. The sub frame itself is above the mounting brackets and is mounted in large rubber bushings that allow considerable movement but also isolate road noise and vibration. Although the sub frame is a massive assembly, it offers no rigidity to the rear body structure since it is mounted in rubber. The rear strut brace is bolted to the same brackets but below the sub frame. This placement results in direct reinforcement of the chassis since the rear strut brace is effectively bolted to the chassis/body. This not only reinforces the chassis itself but also helps maintain proper toe angles of the rear wheels. The rear end "wiggling" is caused by changing toe angles when cornering or driving over uneven surfaces. Most owners report a significant improvement after installing both front and rear strut braces as they seem to compliment each other. This product is designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value.

This alloy Rear Strut Brace is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength. It's all one solid piece and mounts under the car near the front of the rear wheels and is a very simple installation. Since the rear strut brace can't be seen unless you intentionally look under the car, they all come powder coated in a Black textured finish. The rear strut brace is longer than the front one and spans the entire width of the car with a reinforcement beam to tighten up the rear end and force the car to follow the front when you point it into a turn. One driver said it felt like the car had rear wheel steering. When driving over bumps, the car reacts as one piece rather than reacting in "sections" with a bunch of wiggling. The additional rigidity is quite noticeable and evokes more confidence and certainty in tight turns when "G" forces are rapidly switching sides. Fits all models of Z3 Roadsters, E30 series and corresponding ///M series including the S54 engine.

NOTE: IMPORTANT INFORMATION about the Rear Strut Brace's ground clearance below!
Please be advised that the addition of a rear strut brace may reduce your ground clearance. Since various models have some differences and there are a lot of aftermarket suspensions and wheel/tire options out there, we can't be more specific than this. The prototype has been road tested on a 2000 ///M Roadster with a Dinan stage 3 suspension without an incidents. The Dinan kit lowers the stock ///M Roadster by 1/2 inch. On any of the current Z3 models, the rear strut brace will have approximately the same clearance as the bottom of the front air dam or the rear bar of the OEM “X” brace. If ground clearance is an issue with any potential customer, we suggest you do not purchase the rear strut brace. If you do install one, we suggest that you measure the distance from the bottom of the strut to the ground and keep the measurement nearby. Avoid straddling any road objects that exceed this dimension since striking a solid object may cause damage to the vehicle. The cross bar is a very robust structure, 1/2 inch thick and 2 inches wide solid cold rolled steel. Although not tested for crash worthiness, it should be able to withstand a fairly solid hit. The pictures of the installed strut show its orientation and the fact that it could be vulnerable to large objects passing beneath the vehicle. It’s location and strength may prevent damage to the differential from straddled objects.

The only available stock colors is Black powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Unfortunately, the OEM factory rear bracing bars attached to the differential and the rocker panels are terribly inadequate. They are made of a thin, soft, hollow, aluminum material which offers very little resistance to the forces applied to it. There is so much flex in the soft, OEM brace, BMW found it necessary to include an extra brace ON the brace so it wouldn't bend as much (shown on the Additional Images page). Many Z4 owners recognize the need to replace the OEM braces with something that is substantial and considerably more effective. 

The CNC-machined Rear Strut Brace material is hot rolled carbon steel angle iron with legs that are 1½ inches wide and ¼ inch thick. The web, at the point of the “V” which takes the stress, is a full 3/8 inch thick. The end materials are cold rolled 1031 steel of 3/8 inch thickness that begin as billet material. The brace is installed in the “V” configuration with the bottom of the “V” toward the ground and the upper, open side against the underbody of the chassis. There is no “mid bracing” required on our product and when you hold it in your hands you will understand why there is absolutely no flex or movement possible. Installation is a simple bolt on replacement procedure. You will have to elevate the rear of the car to install it but the actual replacement with simple tools is no more than a 30 minute task. Simply remove the OEM brace and use the same mounting points and hardware along with provided spacers, to install the Z4 rear brace.  The installed braces add only nine pounds over the OEM braces and traction at the rear of the vehicle benefits from that extra weight. The set of two braces are designed so road debris or moisture cannot get trapped in the "V".The rear strut brace will not cause the rear of the car to break loose any sooner than a stock setup. It is NOT a suspension component, it simply reinforces and adds rigidity to the rear section of the chassis. Some people confuse it with a stiffer rear anti-sway bar, which, under some circumstances, may make the rear end a bit loose. This product is designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value. Since the rear strut brace can't be seen unless you intentionally look under the car, they all come powder coated in a Black textured finish. The rear strut braces tighten up the rear end and force the car to follow the front when you point it into a turn. One driver said it felt like the car had rear wheel steering. When driving over bumps, the car reacts as one piece rather than reacting in "sections" with a bunch of wiggling. The additional rigidity is quite noticeable and evokes more confidence and certainty in tight turns when "G" forces are rapidly switching sides. Fits all models of Z4 and ///M series Roadsters.

NOTE: IMPORTANT INFORMATION about the Rear Strut Brace's ground clearance below!
Please be advised that the addition of a rear strut brace may reduce your ground clearance. Since various models have some differences and there are a lot of aftermarket suspensions and wheel/tire options out there, we can't be more specific than this. The prototype has been road tested on a 2007 ///M Roadster suspension without an incidents. If ground clearance is an issue with any potential customer, we suggest you do not purchase the rear strut brace. If you do install one, we suggest that you measure the distance from the bottom of the strut to the ground and keep the measurement nearby. Avoid straddling any road objects that exceed this dimension since striking a solid object may cause damage to the vehicle. Although not tested for crash worthiness, it should be able to withstand a fairly solid hit. The pictures of the installed strut show its orientation and the fact that it could be vulnerable to large objects passing beneath the vehicle. It’s location and strength may prevent damage to the differential from straddled objects.

Comes in a set of two rear strut braces. The only available stock colors is Black powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

When used in combination with a Front Strut Brace, the set of two Firewall Strut Braces add considerable rigidity to the front of the car, improve steering response by maintaining proper suspension geometry while cornering and maintain structural integrity of your prized Z4 over the years resulting in an outstanding and remarkable improvement. The stunning appearance will add to the beauty of your sculpted Z4 especially with the addition of chrome plating.

The factory installed strut to firewall braces are poorly designed. The ends are flattened to an 1/8 of an inch which provides almost no support or rigidity. If a chain is only as strong as its' weakest link, an 1/8 of an inch is a very weak link! In addition, the ends of the OEM braces tend to crack from metal fatigue, and dealers are just welding them back together. Our replacement set of two Firewall Strut Braces greatly improve the performance and appearance over the factory version and are designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value. 

This set of two alloy Firewall Braces are CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and one half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all models of Z4 and ///M series Roadsters.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

NOTE: BMW utilizes two different attachment methods when installing the factory firewall braces. The hardware included with your set of Firewall Strut Braces depends upon the specific attachment method used on your vehicle. Please don't confuse "bolt" with "nut" when placing your order. If you are unsure, please send a photo or give us a call with any questions. The two attachment methods appear below. Please make your selection on the checkout screen.

Attachment Method 1: A threaded stud sticking UP out of the chassis with the firewall brace on it and a NUT tightened down on top of the brace ends

Attachment Method 2: A hex head BOLT that screws DOWN into the chassis on top of the brace ends with nothing sticking up

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. When used in combination with a Front Strut Brace, the Firewall Strut Braces add considerable rigidity to the front of the car, improve steering response by maintaining proper suspension geometry while cornering and maintain structural integrity of your prized Z4 over the years resulting in an outstanding and remarkable improvement. The stunning appearance will add to the beauty and sportiness of your sculpted Z4 especially with the addition of chrome plating (See special package price below). This discounted combination package set includes a Front Strut Brace, two matching Firewall Strut Braces and the small accessory kit!

The factory installed strut to firewall braces are poorly designed. The ends are flattened to an 1/8 of an inch which provides almost no support or rigidity. If a chain is only as strong as its' weakest link, an 1/8 of an inch is a very weak link! In addition, the ends of the OEM braces tend to crack from metal fatigue, and dealers are just welding them back together. Our replacement set of two Firewall Strut Braces greatly improve the performance and appearance over the factory version and are designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, setting a new standard in design and value. 

This set is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and one half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all models of Z4 and ///M series Roadsters.

The available stock colors are Black and Silver powder coating. Chrome plating is available for an additional $375 total for all 3 braces and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the picture or title above for additional images. This is the perfect performance enhancement and a must have item for any Roadster enthusiast!

NOTE: BMW utilizes two different attachment methods when installing the factory firewall braces. The hardware included with your set of Firewall Strut Braces depends upon the specific attachment method used on your vehicle. Please don't confuse "bolt" with "nut" when placing your order. If you are unsure, please send a photo or give us a call with any questions. The two attachment methods appear below. Please make your selection on the checkout screen.

Attachment Method 1: A threaded stud sticking UP out of the chassis with the firewall brace on it and a NUT tightened down on top of the brace ends

Attachment Method 2: A hex head BOLT that screws DOWN into the chassis on top of the brace ends with nothing sticking up

CLICK here for a look at the Installation Instructions... CLICK here if you need Adobe Reader

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

A properly engineered shock tower strut reduces or eliminates the chassis and shock tower flex that occurs during hard cornering and driving over uneven, bumpy surfaces. When used in combination, the Front Strut, Rear Strut and Body Brace sets provide outstanding results and a remarkable improvement in the rigidity of the car. The 3 units acting together contribute significantly to the structural integrity of the car and improve maneuverability by maintaining the proper wheel camber and suspension geometry, providing a much "tighter" and "robust" chassis feel over bumpy roads. Designed to appear as original manufacturers equipment, not like an added aftermarket accessory, built to higher quality standards with superior materials and offered at a much lower price than the competitive products, this discounted combination package sets a new standard in design and value. The stunning appearance will add to the beauty and sportiness of your sculpted Z3 especially with the addition of chrome plating on your front strut brace!

This set is CNC-machined from solid aircraft grade 6061 alloy and heat treated to T-6 specifications for added strength, breaking new ground in the alloy strut field by utilizing an exclusive "Direct Block Pivotless Design." Extremely robust and immovable, this design features an extended cross bar that attaches directly to the tower ring block without the need for additional fittings. There are no pivot points, hollow tubes or stamped components in the construction. In addition, there is a massive, proven, two inch wide and one half inch thick, machined alloy cross bar with weight saving, decorative, drilled holes. Fits all models of Z3 Roadsters and ///M series including the S54 engine. It does NOT fit 4 cylinder models due to lack of room for the cross bar.

The available stock colors are Black and Silver powder coating. Chrome plating is available for the Front Strut Braces only for an additional $300 and will take an additional 3-4 weeks due to the three steps involved in the restoration grade process. A two year warranty is included on the powder coat and chrome plate finishes. 100% Satisfaction Guarantee on the part for the life of the car against fracture or failure (for any unmodified BMWs without after-market performance accessories already installed, not including collisions or deformations of any kind). CLICK on the pictures or titles of the individual products listed below for additional images. Full product descriptions and installation instructions can also be found below each individual product listing below. This is the perfect performance package enhancement and a must have item for any Roadster enthusiast!

This is an oversized shipment, $30.00 will be added to the normal S/H charges.

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The ///M Front Strut Brace Accessory Kit replaces the unsightly OEM stud nuts and enhances the appearance as a perfect match for the other stainless hardware on the BMW Front Strut Brace. The Kit includes two black plastic caps that fit over the open holes in the tower domes along with 6 stainless steel washers and acorn nuts in the proper metric thread. Works with any brand of strut braces that have an uncovered tower ring.

NOTE: This kit is ONLY for the ///M and will NOT fit any other models.

CLICK on the picture or title above for additional images. This is the perfect accessory and a must have item for any Roadster enthusiast!

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

The Z3 Front Strut Brace Accessory Kit replaces the unsightly OEM stud nuts and enhances the appearance as a perfect match for the other stainless hardware on the BMW Front Strut Brace. The Kit includes 6 stainless steel washers and acorn nuts in the proper metric thread. Works with any brand of strut braces and fits any Z3 models. CLICK on the picture or title above for an image WITHOUT the kit. This is the perfect accessory for any Roadster enthusiast!                                   Price $0.00 + S/H  

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

Aero Ducts divert the air flow currents in front of the rear tires and help to prevent hydroplaning while also working toward noise reduction in convertibles. The air ducts change the pressure in the wheel house, ideally to improve the aerodynamic resistance and axle buoyant force. Since the wheels/wheel house account for about 30% of total aerodynamic resistance, the aero ducts are an exceptional enhancement to improve the air flow in that area of the vehicle.

This set of 2 BMW Z3 Aero Ducts replaces the unsightly factory plastic units that often split, crack and deteriorate from impacts with road debris after less than a year of service. Replacing them with OEM factory parts every year at approximately $35 per set may not be very cost effective. This powder coated set is fabricated from aluminum alloy with parts riveted together and will last the lifetime of your Roadster with reasonable care!

CLICK on the picture or title above for additional images. This is the perfect performance enhancement accessory and a must have item for any Roadster enthusiast!

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.

This product is NO LONGER AVAILABLE.

 MATCHING Factory Colors in a Convenient Spray Can!

This paint kit can be used to paint many portions of your car. For example, Roadster Solutions Stone Guards or rear license plate frames can be painted to match your car's color and many other items too. Each kit contains: one 12 oz. color coded spray can of official factory-matching paint with a "fan" spray head; one 12 oz. spray can of lacquer compatible, platinum primer; one 12 oz. spray can of clear coat; and one medium grade 3M sanding pad along with instructions and painting tips/suggestions. Additional matching color coded spray cans may be added to your order on the checkout screen.

These products are "plastic friendly" so they can be used to paint trim pieces, etc. A "flex agent" is not necessary with lacquer paint. The painted Stone Guards will still bend substantially without cracking the paint. CLICK on the picture or title above for additional images or to find the location of your paint code.

Please note ONLY GROUND SHIPMENT OF THIS PRODUCT IS POSSIBLE, NO INTERNATIONAL ORDERS PLEASE.

 This is the perfect enhancement accessory and a must have item for any Roadster enthusiast!

Price $0.00 + S/H                                                    

Sorry - This item is NO LONGER AVAILABLE.