SLK (R171) CLEAR WindBlocker
SLK (R171) Clear Windblocker Installation Instructions
Fits all SLK 2005 and newer
1. Acrylic panel (1)
2. Mounting brackets (2)
3. Alcohol wipes (2)
Note: panel shown is for photo purposes, panel in kit is clear.
Identify correct position of windblocker as shown. Panel should align approximately with center of roll hoops
with the longer side of the mounting brackets facing rearward. When positioned properly the windblocker has
a slight forward leaning angle.
Use alcohol wipes to thoroughly clean surface where mounting brackets will be located. Allow to dry.
Remove backing tape from each mounting bracket
Apply windblocker to predetermined position between roll hoops. Firmly apply pressure to
achieve maximum contact on each mounting bracket for 10-15 seconds.
Important: Proper installation requires the brackets and mounting surfaces to be at least
70 degrees F.
Care and cleaning:
The acrylic panel is a semi permanent installation. It is not designed to be removed and reinstalled.
Clean in place with mild soap and water. NEVER use solvents, ammonia, or alcohol based
household glass cleaners as panel damage will occur.